Shield your equipment against abrasion
Discover the TEKAD®5000 Range
Chutes, hoppers, buckets, pipes: abrasion wears down your equipment prematurely, day after day. Every unplanned shutdown, every part replacement costs time and money. That’s exactly the problem the TEKAD®5000 range solves.
With chrome carbides of 58 to 65 HRC metallurgically bonded to a robust base steel, TEKAD®5000 creates a barrier between your equipment and the abrasive material wearing it down.
A complete range, one single supplier
The strength of TEKAD®5000 is covering all your wear-related needs under one roof:
- Wear plates — chrome carbides metallurgically bonded to Q345 steel
- Overlaid pipes — reinforced walls, elbows, fittings and sections up to 12 m
- Custom cutting — parts cut, drilled and bent to your dimensions, ready to bolt on
- Fabricated parts — chutes, liners and complete assemblies built to your plans
One single supplier to shield, repair and replace — with a fast quote from a simple plan or photo.
A base steel that makes the difference: Q345
Most competitors overlay their plates on A36 or 44W. At TEKAD, our plates use a Q345 base steel, offering strength equivalent to dual-certified 50W/50A plates — the kind required for fans and parts subject to continuous vibration or impact.
The result: fewer unplanned shutdowns, fewer replacements, less scrap steel.
Six grades for every wear condition
| Grade | Hardness | Overlay | Usage conditions |
|---|---|---|---|
| 5000-100 | 58–65 HRC | Chrome carbide | Moderate abrasion |
| 5000-200 | 58–65 HRC | High-density chrome carbide | Severe abrasion |
| 5000-300 | 58–65 HRC | Complex carbides (Nb, Mo, V, Ti) | Heavy abrasion + impact |
| 5000-600 | 58–65 HRC | Chrome carbide + tungsten | Extreme abrasion |
| 5000-F | 58–65 HRC | Smooth fused surface, no beading | Anti-material buildup |
| 5000-M | 50–55 HRC | Machinable, crack-free | Machined parts, slides |
Standard full plate: 2,000 x 3,000 mm (78 in x 118 in), i.e. 64 ft², thicknesses from 2+2 to 20+80 mm. Other sizes on request.
Armored screw conveyors
Screw conveyors and washing screws wear continuously — sand, aggregates, sludge, flight after flight. TEKAD®5000 protects the flighting, shaft and trough in two ways:
- Bolted, field-replaceable CCO segments
- Full welded chrome carbide overlay
All screw types are covered — shafted, shaftless and washing screws — whether new equipment or refurbishment. Everything is handled turnkey: preparation, armoring and finishing done in-shop. The screw comes back ready to install.
Where is TEKAD®5000 used?
- Chutes, hoppers and truck beds
- Buckets, blades and cutting edges
- Crusher and grinder liners
- Fans, cyclones and separators
- Pneumatic and hydraulic pipelines
- Screws, conveyors, screens and feeders
Our process, in five steps
- Wear analysis — we identify where and how your parts wear
- Grade selection — we select the TEKAD®5000 grade suited to your conditions
- Custom fabrication — cutting, drilling, bending to your plans
- Delivery — parts ready to install
- Technical follow-up — ongoing support
Is abrasion wearing down your equipment?
Send us a photo, a plan or dimensions — we’ll get back to you quickly with a quote, and your parts are delivered ready to install.
Contact us: 1 877 807-2739 | contact@tekad.ca | TEKAD.CA
TEKAD®5000 is a trademark of Les Industries TEKAD inc.
CONTACT INFORMATION
2735 Rue Jules Vachon
Trois-Rivières (QC) G9A 5E1
T : 1-877-807-2739